This job offer is not available in your country.
Job Openings at Western Development Company Limited
Western Development Company LimitedRivers (PH), NG13 days ago
Job descriptionThe work location is field-based in swamp terrain located in Soku, Rivers State Work is Port Harcourt-based; candidate may attend courses at IA PHC or other PHC locations, and other official assignments Job activity is a 12-hour daily routine (7 : 00 am to 7 : 00 pm) over a 21-day period Standard schedule : 3 weeks on, 3 weeks off Candidate will manage own absences with contractor, ensuring suitable qualified cover Personnel may be required to work extended hours as need arises OND or HND in Mechanical or Instrumentation & Controls Automation Engineering or any other relevant discipline Certificate from School of Basic Instrumentation will be an added advantage Ability to read drawings – PEFS, PSFS, C&E, FLD, loop diagrams, etc. Sound knowledge of process instrumentation – major process parameters measured, types of sensors / instruments, principles of measurement, etc. Sound knowledge of loop components – IS barriers, surge protectors, FISCO, I / O modules Sound knowledge of communication protocols – HART, Foundation Fieldbus, Modbus, Profibus, DeviceNet, etc. Sound knowledge of Fire & Gas devices – types of detectors, principles of operation, Logic Solvers, Output Devices Sound knowledge of operation and maintenance of valves – control valves, SDVs, BDVs, solenoid valves, actuators, positioners, transmitters, air regulators, etc. Skilled in calibration of switches and transmitters (pressure, differential pressure, level, temperature, flow, and absolute pressure) Skilled in maintenance of valves (control valves, ESDVs, MOVs, manual valves), positioners, I / P converters Skilled in use of handheld communication devices (Field Communicator, Interrogator, Fieldmate, NI Fieldbus Communicator, FB Tool, Oscilloscope, Installation / configuration of Foundation Fieldbus & HART devices using Engineering Workstation (EWS) Engineering of CentumVP and SIS systems Use of Yokogawa AMS Navigation / configuration of ProSafe safety systems using ProSafe-PLC 4-mation & ProSafe-RS Logic navigation using FLD; sound knowledge of SLS modules Engineering and maintenance of ControlLogix, RSLogix5000, RSLogix500 Installation / configuration of PLCs, I / O modules, and field devices Programming and HMI engineering (PanelView, FactoryTalk) Connection and use of laptop for PLC engineering Engineering of System302 software Installation / configuration of Foundation Fieldbus devices and PLCs Programming techniques, ProccessView HMI, and laptop interface Installation / configuration of Foundation Fieldbus devices using EWS Engineering of DeltaV software – function block editing, DCS controllers, I / O modules HMI graphics modification Perform basic computer-related activities Knowledge of worksite hazard management and permit to work systems Ability to multitask effectively Communication and teamwork Ability to work under pressure Good organizational skills Flexibility and adaptability Self-motivated and able to work under minimal supervision Take daily logs of equipment parameter, identify equipment deviation outside normal operating parameters. Participate in review of maintenance job routines and preparation of work method statements. Participate in job hazard analysis / prepare job risk assessment. Identify appropriate personal protective equipment (PPE) associated with the activity. Identify and stage materials, equipment spares and tools for equipment maintenance. Verify isolation of energy sources in preparation for maintenance work. Gather appropriate documentation and prepare Permit to Work. Set up worksite and equipment for maintenance activity. Execute routine maintenance activities in line with original equipment manufacturer (OEM) and company standards. Troubleshoot and analyze equipment faults using diagnostic tools, test devices and measuring instruments. Support OEM field service representatives during execution of major equipment maintenance activities. Conduct proper housekeeping and restore work site to a safe state after job completion. Document equipment logbook with performance data post maintenance work and update equipment maintenance records. Support reviews of operating / maintenance procedure and propose changes. Support planning of mechanical scope of major / turnaround / milestone maintenance activities. Participate in equipment failure investigation (root cause analysis) and proffer improvement initiatives. Comply with HSE practices and procedures. Participate in HSE meetings and site safety campaigns. Close out all other assigned actions in line with audit findings. The work location is field based in swamp terrain located in Soku, Rivers State. Work is Port Harcourt based and you may be required to attend courses in IA PHC or other PHC locations as advised, as well as other official assignments. The job activity period is daily on 12-hour (7am to 7pm) routine over a 21-day period. There is a standard 3 weeks on and 3 weeks off schedule. The successful candidate will manage own absences with his / her contractor for suitable qualified covers. Personnel may be required to work extended hours as need may arises OND in Engineering from accredited Polytechnics or Monotechnics Full Technological Certificate (FTC) / Advanced Technician Diploma Advanced NABTEB in Engineering-related subjects City & Guilds Diploma / Advanced Diploma Professional certificate in Engineering from Polytechnics or specialized institutions Identify the various types of pumps, engines, compressors, and other rotating equipment within the oil and gas industry Evaluate and interpret equipment performance and integrity data Recognize and respond to abnormal conditions and take appropriate corrective action Troubleshoot and diagnose common faults on rotating equipment Perform servicing and repair in line with recognized procedures and standards Apply approved procedures and standards for disassembly and reassembly of rotating equipment components Carryout major inspection and overhaul of equipment Use of the appropriate tools and equipment Knowledge of the various types of condition monitoring activities and diagnostic tools Provide support during equipment shutdown, start-up, isolation, and re-instatement as part of the maintenance process Identify the various types of static equipment within the oil and gas industry Provide support during inspection activities ., removal and re-instatement of static equipment Carryout inspection of filters / strainers and valves Knowledge of basic mechanical tools and workshop machinery Interpret machinery / equipment information from drawings, diagrams, and technical manuals Knowledge of alignment of shafts, couplings, belts, and pulleys on equipment Computer literate, ability to perform basic computer-related activities Competent user of Microsoft Office applications Knowledge of worksite hazard management and permit to work systems Effective team player and ability to work in a multidisciplinary team Good communication and presentation skills Good time management and organizational skills Ability to adapt promptly to change Ability to work under pressure Self-motivated and ability to deliver tasks under minimal supervision. Assess health of electrical equipment, identify equipment deviation outside normal operating parameters. Participate in review of maintenance job routines and preparation of work method statements. Participate in job hazard analysis / prepare job risk assessment. Identify appropriate personal protective equipment (PPE) associated with the activity. Gather appropriate documentation and prepare Permit to Work. Identify and stage materials, equipment spares, and tools for equipment maintenance. Carry out isolation of energy source in preparation for maintenance work. Execute routine maintenance activities in line with Original Equipment Manufacturer (OEM) and company standards. Troubleshoot and analyze electrical equipment faults using diagnostic tools, test devices, and measuring instruments. Support OEM field service representatives during execution of major equipment maintenance activities. Conduct proper housekeeping and restore work site to a safe state after job completion. Document relevant logbook with performance data post-maintenance work and update equipment maintenance records. Support reviews of operating / maintenance procedures and propose changes. Support planning of electrical scope of major / turnaround / milestone maintenance activities. Participate in equipment failure investigation (root cause analysis) and proffer improvement initiatives. Comply with HSE practices and procedures. Participate in HSE meetings and site safety campaigns. Close out all other assigned actions in line with audit findings. The work location is field-based in swamp terrain located in Soku, Rivers State. Work is Port Harcourt based and you may be required to attend courses in IA PHC or other PHC locations as advised, as well as other official assignments. The job activity period is daily on a 12-hour (7 : 00 am to 7 : 00 pm) routine over a 21-day period. There is a standard 3 weeks on and 3 weeks off schedule. The successful candidate will manage own absences with his / her contractor for suitably qualified covers. Personnel may be required to work extended hours as the need may arise. OND in Engineering from accredited Polytechnics or Monotechnics Full Technological Certificate (FTC) / Advanced Technician Diploma Advanced NABTEB in Engineering-related subjects City & Guilds Diploma / Advanced Diploma Professional certificate in Engineering from Polytechnics or specialized institutions Knowledge of electrical safety, use and application of electrical safety rules, identification, and mitigation of hazards. Knowledge of electrical standards as well as electrical protection and control systems. Methods of repair of Ex-equipment, including limitations of what can or cannot be repaired and certification implications and requirements. Identify the various electrical low voltage (LV) equipment – generators, motors, lighting, heat tracing, switchgear, small transformers, UPS, and batteries. Identify the various high voltage (HV) equipment – generators, motors, large transformers, switchgear. Evaluate and interpret equipment performance and integrity data. Recognize and respond to abnormal conditions and take appropriate corrective action on LV / HV equipment. Troubleshoot and diagnose common faults on LV / HV equipment. Perform servicing and repair in line with recognized procedures and standards. Apply approved procedures and standards for disassembly and reassembly of electrical equipment. Use of the appropriate tools and equipment. Knowledge of the various types of condition monitoring activities and diagnostic tools. Provide support during equipment shutdown, start-up, isolation, and re-instatement as part of the maintenance process. Perform routine maintenance of the earthing and lighting system. Carry out lighting system maintenance around the Facility. Knowledge of maintenance routines on cathodic protection systems. Knowledge of basic electrical tools and workshop machinery. Knowledge of area classification layouts and electrical equipment for hazardous areas. Interpret information contained in the various types of electrical drawings. Computer literate, ability to perform basic computer-related activities. Competent user of Microsoft Office applications. Good communication and presentation skills. Good time management and organizational skills. Effective team player and ability to work in a multidisciplinary team. Knowledge of worksite hazard management and permit to work systems. Ability to adapt promptly to change. Ability to work under pressure. Self-motivated and ability to deliver tasks under minimal supervision.
Job Openings at Western Development Company Limited
Western Development Company Limited (WDCL) is an independent limited liability company, established in Nigeria for over 13 years ago. WDCL is the sole representative of various overseas companies in the fields of Information Technology, Telecommunications, Mechanical Engineering and Electrical / Electronic Engineering.
We are recruiting to fill the following positions below :
Instrument (PACO) Engineering Support Services Officer
Job Location : Soku - Port Harcourt, Rivers
Job Type : Contract
Start Date : 1st July 2025
Age : Not Applicable
Gender : Male / Female
Roles and Responsibilities
- Troubleshooting of safety critical equipment and control / safeguarding system
- Supporting production staff in maintaining facilities
- Assist maintenance team with high-volume tasks to sustain asset integrity / equipment availability
- Comply with HSE practices and procedures
- Assist in ensuring technical integrity and safe operation of new systems
- Identify areas requiring change control and document proposals
- Provide specification for critical spares / replacements with vendor details
- Review operating / maintenance procedures and propose updates
- Develop Maintenance Job Routines (MJRs), procedures, and work packs
- Identify vendor support requirements for equipment maintenance
- Provide technical support for malfunctioning equipment
- Liaise with OEMs for troubleshooting, spares, and field support
- Support troubleshooting by the operations / maintenance team
- Execute routine maintenance in line with local / international standards
- Participate in equipment failure investigations (RCA) and improvement initiatives
- Participate in Management Facility Inspections (MFIs) and HSE meetings
- Close out personal MFI actions
Work Cycle
Requirements
Academics :
Work Experience :
Minimum of 3 years of relevant experience in Asset Operations as a PACO Technician
Skills :
Must possess Competence No. 1 plus at least one of Nos. 2 – 5
General Instrumentation :
Yokogawa DCS / SIS Engineering and Maintenance :
Allen Bradley Systems Engineering and Maintenance :
SMAR Systems Engineering and Maintenance :
DeltaV DCS Engineering and Maintenance :
Soft Skills (Added Advantage) :
Mechanical Support Officer
Job Location : Soku - Port Harcourt, Rivers
Job Type : Full-time
Start Date : 1st July 2025
Age : Not Applicable
Gender : Male / Female
Roles and Responsibilities
Work Cycle :
Requirements
Possession of any of the following qualifications :
Work Experience :
Minimum of 2 years of relevant professional engineering experience within the Oil and Gas Industry.
Skills :
Must possess the following competences :
Maintenance of Rotating Equipment - Gas & Diesel Engines, Gas Turbines, Reciprocating & Centrifugal Pumps, Gas Compressors, Air Compressors, Blowers, etc. :
Static Equipment Maintenance :
General :
Soft Skills (Added Advantage) :
Electrical Support Services Officer
Job Location : Soku - Port Harcourt, Rivers
Job Type : Contract
Start Date : 1st July 2025
Age : Not Applicable
Gender : Male / Female
Roles and Responsibilities
Work Cycle :
Requirements
Possession of any of the following qualifications :
Work Experience :
Minimum of 2 years of relevant professional engineering experience within the Oil and Gas Industry.
Skills :
Must possess the following competences :
Electrical Safety :
Maintenance of Electrical Equipment
Other Electrical Maintenance
General
Soft Skills (Added Advantage) :
Create a job alert for this search
Development Job At • Rivers (PH), NG